Regular price
£112.00 GBP
Sale price
£112.00 GBP
Regular price
Apeks Pressure Gauge with Hose
Usually with you within 7 working days.
Need it sooner? Contact us
Buy it with
-
Miflex Miflex Inflation Hose Quick ReleaseRegular price From £26.00 GBPSale price From £26.00 GBP Regular price£29.00 -
Aqualung Aqualung i330R Dive ComputerRegular price £290.00 GBPSale price £290.00 GBP Regular price -
Beaver Sports Beaver Digi Line Finger ReelRegular price From £22.75 GBPSale price From £22.75 GBP Regular price -
Faber Faber Steel Dive CylinderRegular price From £255.00 GBPSale price From £255.00 GBP Regular price£380.00
Apeks Pressure Gauge with Hose
The Apeks Pressure Gauge with Hose is a straightforward submersible pressure gauge, supplied on its own high pressure hose and ready to fit to your first stage. It's a single gauge with no compass and no console, so there's nothing to snag and nothing between you and the number that matters.
We sell it in two versions. The standard hose suits most recreational setups. The narrow hose is slimmer and tidier along your harness or chest D-ring, which a lot of our drysuit and technical divers prefer. Choose the hose option above. The gauge itself is the same on both.
On this page
- Single submersible pressure gauge on a high pressure hose
- 0 to 360 bar dial
- Choice of standard hose (724004) or narrow hose (724005)
- Standard 7/16" UNF fitting for any first stage HP port
Fits any first stage with a free high pressure (HP) port, not just Apeks. If you're unsure which port is HP on your regulator, ask us before you order.
Why divers choose the Apeks Pressure Gauge
You read your gas at a glance
The large white face and clear red reserve band are easy to read in green UK water and poor light. You check your gas, you see the needle, you carry on with the dive.
It takes a knock
The gauge sits in a moulded rubber boot that takes the hits from boat decks, cylinder racks and the back of a car. The loop at the top gives you somewhere to clip it off so it isn't dangling.
Simple to replace or upgrade
Because it comes as a gauge and hose together, swapping out an old console or a cracked gauge is a five minute job. No separate hose to buy.
Features that matter underwater
Standard or narrow hose
The standard hose is the familiar choice for single cylinder recreational diving. The narrow hose is slimmer, so it routes neatly and adds less bulk where you run it under your arm and clip the gauge to your harness.
Protective boot with clip loop
The boot protects the gauge body and lens, and the top loop takes a bolt snap or a bungee so the gauge stays where you can find it.
Fit your pressure gauge to a high pressure port only. If you're not confident fitting hoses, bring your regulator to us and our service team will fit and leak test it for you.
Who is the Apeks Pressure Gauge for?
- Divers replacing a worn or damaged gauge on an existing regulator
- Divers moving from a bulky console to a single clipped-off gauge
- Drysuit and technical divers who want a slimmer hose route (choose the narrow hose)
Who it may not be for: if you want a compass and gauge together, or you'd rather read gas pressure on your wrist with a transmitter, look at our dive computers instead.
Specifications
| Type | Submersible pressure gauge (SPG) with HP hose |
|---|---|
| Dial range | 0 to 360 bar |
| Hose fitting | 7/16" UNF high pressure |
| Hose options | Standard hose (SKU 724004) or narrow hose (SKU 724005) |
| Brand | Apeks |
What's included
- Apeks pressure gauge in protective boot
- High pressure hose (standard or narrow, as chosen)
Building a full setup? Browse our regulators or hoses, or contact us and we'll put it together for you.
Frequently asked questions
Will it fit my non-Apeks regulator?
Yes. HP ports and pressure gauge hoses use a standard 7/16" UNF thread, so it fits any first stage with a free HP port.
Standard or narrow hose, which should I pick?
For a typical single cylinder setup, the standard hose is fine. If you dive a drysuit, clip your gauge to a chest D-ring, or just want a tidier rig, go for the narrow hose.
Can I try it before I commit?
Yes. Spend over £100 with us and you can try your kit for free at one of our five pool sites, with an instructor on hand.
Can you fit it for me?
Yes. Our service team can fit the gauge to your regulator and leak test it. Get in touch or drop it into the shop.
A gauge you can rely on
A clear, tough single gauge from Apeks, ready to fit. Pick your hose and we'll get it out to you.
Still exploring? Browse the full Apeks range or our Scuba Diving Regulators collection.